C.R. Laurence of Canada
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: TPC5GL

  • Transparent Polymer Coating

  • Water, Soil, and Stain Repellant

  • Protects Glass and Many Other Surfaces
  • Click Here for Tips on How To Use TPC
  • Will Call Pickup Only

  • CRL TPC Surface Protector will actually seal the pores of glass, porcelain, ceramic, plastics, polished metals, fiberglass, and marble to make the surface water, soil, and stain resistant. The clear coating guards against the adhesion and build-up of dirt, grime, mold, mildew, rust and mineral deposits. Environmentally friendly and non-toxic, CRL TPC Surface Protector permits the practice of preventive maintenance, reducing costly cleaning, repairs and replacement. Simply spray on and polish off. 1 Fl. oz. (29 ml) of TPC Surface Protector protects approximately 15 sq. ft. (1.4 meters square) of glass. Also available in 55 gl. (208 l) drums on special order.

    CRL TPC Surface Protector - 5 Gallon Pail


    Other Products/Finishes:

    TPC16 CRL TPC Surface Protector - 16 Ounces
    TPC16P CRL TPC Surface Protector Towelettes
    TPC5GL CRL TPC Surface Protector - 5 Gallon Pail

    Catalog Number:TPC5GL
    Also Available in These Catalogs:
    CRL53R Glass & Glazing Catalog, PAGE 216G
    CRL63R Architectural Railing Systems, PAGE 591R
    CRL83R Door and Window Replacement, PAGE 908W
    CRL03 Sealants, Adhesives, and Fasteners, PAGE N341
    Contents of Pail:5 Gallons (18.9 l) Pail
    Ship Via:Hazardous Material - No Air Shipments
    Shipping Weight:25 lb (11.34kg)

    No additional product information available at this time.

    Check label and Material Safety Data Sheet for any additional limitations and warnings. PROCEDURE FOR THE EFFECTIVE TREATMENT OF SAND-BLASTED GLASS 1. Due to the variable nature of the sandblasting process (i.e. different grit size and blasting pressure resulting in variable depth, etching configuration and amount of residual glass particles), before treatment with CRL TPC SURFACE PROTECTOR, sandblasted glass must be thoroughly washed and dried. 2. The CRL SURFACE PROTECTOR must be applied using a strong, padded cloth and a firm, circular and overlapping motion. The product should be allowed to dry (haze) and then it should be reapplied to ensure complete coverage. 3. When the surface is dry (i.e., the final "haze" has formed), the surface should be sprayed with plain water to test for uniform water beading. When the applicator is satisfied that the "beading" is uniform, the surface should then be washed with a mild detergent solution or an alcohol and water solution to remove all excess polymer (this "excess" is what sometimes looks like "stains" and makes the surface look darker in spots). Finally, the surface should be dried. THIS PROCESS WILL YIELD A PERFECTLY UNIFORM, WELL-TREATED SURFACE THAT WILL TYPICALLY LAST FOR YEARS UNDER ORDINARY USE. While this appears to be a complicated procedure, it really is not. Most people who treat sandblasted glass in this manner ultimately agree that it is really quite simple once you get used to the process.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.