English
text.skipToContent text.skipToNavigation

CRL 8" Pump-Action Vacuum Lifter

Item #: S7950
View Prices with a Purchase Account
Minimum Order Quantity : 1
Unit of Measure : each

Shipping Weight : 4.0 Pounds
Shipping Limitations : None
Compliance and Restrictions
Warning Reproductive Harm - www.p65warnings.ca.gov
CRL 8" Pump-Action Vacuum Lifter
×
CRL 8" Pump-Action Vacuum Lifter
Quantity Standard Price Sale Price Your Price
CRL 8" Pump-Action Vacuum Lifter Stock
Branch Location STOCK AVAILABILITY
Los Angeles, California 315
Dallas, Texas 25
Chicago (Elgin), Illinois 16
San Francisco/Oakland (Union City), California 9
Atlanta, Georgia 27
New York Area (Secaucus, New Jersey) 19
Boston (Taunton), Massachusetts 4
Orlando, Florida 9
Denver, Colorado 8
Seattle (Kent), Washington 7
Cleveland (Solon), Ohio 13
Philadelphia Area (Moorestown, New Jersey) 14
Phoenix, Arizona 5
Las Vegas, Nevada 15
Houston, Texas 9
Miami, Florida 10
San Diego, California 11
Los Angeles(Gardena) In Other Service Center
Carolinas and Virginia, South Carolina 8
Product Details
  • Diameter
    8 Inches
  • Lifting Capacity
    125 lbs.(57 kg)
  • Wrist Circumference
    8 in. (203 mm)
Product Overview
  • Heavy-Duty Stainless Steel Handle
  • Lifting Capacity 125 Lbs. (57 kg)
  • Tough ABS Plunger with Red-Line Indicator
  • Fast Attachment on Smooth, Non-Porous Flat Surfaces
  • Can Be Re-Pumped without Losing Remaining Vacuum
  • Wide Release Valve Lever with Safety Guard Permits Quick and Complete Release
  • 8" (203 mm) Vacuum Pad
  • Special Distributor Pricing Available

CRL has developed the S7950 8" (203 mm) Pump-Action Vacuum Lifter with the strength of a heavy-duty stainless steel handle and a tough ABS 3-stroke Plunger Pump for extra-fast attachment to glass and other non-porous surfaces. The Plunger uses a red-line indicator to let you know that you have sufficient vacuum to lift your load. Should the red-line appear after pumping, a built-in check valve allows you to re-pump without vacuum loss.

The large rubber pad area of over 50 square inches makes full face contact when the Lifter is pumped, and allows attachment to glass of varying thickness with very little risk of damage.

To release the S7950 Lifter from the surface, simply press the vacuum release lever (which is protected by a guard during use) and the pad detaches from the surface without any residual sticking. Four 5/16" (7.9 mm) diameter holes in the handle are convenient locations to attach guide ropes when using these Vacuum Lifters mounted on one of CRL's Manual Lifting Frames, as well as for other utility attachments.

Product Warning:

Lifting Capacity 125 lbs. (57 kg)

Instructions for Troubleshooting:
Remove the six screws to separate the handle and the rubber pad. Then, inspect the handle and the rubber pad separately.
1. Check if the issue is related to the rubber pad:
  • Attach the rubber pad to a functioning handle, then test by pumping.
  • If the issue is resolved, the problem lies with the disassembled handle.
  • If the issue persists, the problem is with the rubber pad. Likely causes include excessive dust or hair on the sealing edge or wear on the sealing edge of the rubber pad.

2. Check if the issue is related to the handle:
  • Block the air inlet of the handle using a finger or a pipe sealed at one end and pump, then observe the plunger.
  • If the plunger does not move outward, the issue is with the disassembled rubber pad.
  • If the plunger moves outward, the problem lies with the disassembled handle. The likely cause includes the evaporation of silicone grease inside the handle.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Technical References & CAD Drawings